Caged temporary string lights running along the ceiling of a building under construction.
17

Nov

Which Temporary String Light Do I Need? A Guide to the SL Series

Every construction stringer is a length of cord with lampholders on it, but the differences decide whether it fits your job: whether lamps come in the box, whether the run is grounded, how heavy the cord is and how many strings you can chain. This guide walks through those choices and matches each one to a model in our SL Series.

The SL Series at a glance

ModelCordLampsOutputRatingBest for
SL10-10014/2 SJTW10 × 12W LED + cages included11,000 lm12A, 125VReady-to-hang general lighting
SL14-214/2 SJTWNone; cages includedDepends on lamps12A, 125VCrews that stock their own lamps
SL14-314/3 SJTWNone; cages installedDepends on lamps12.5A, 1,500WSites that require grounded runs
SL12-312/3 SJTWNone; cages installedDepends on lamps12.5A, 1,500WLong chains, big floors, heavy-duty sites
SL18-2 LED18/2 SJTW10 × 12W LED included11,000 lm12W max per lampLight-duty LED-only runs
SL18-2 INT18/210 integrated LED heads16,000 lm130W; links up to 4Maximum output, no bulbs to replace

Every model is 100 ft with ten lights on 10 ft centers. The SL10-100, SL14-2, SL14-3, SL12-3 and SL18-2 LED are ETL listed to UL 1088, the safety standard for temporary lighting strings. If your site or general contractor requires UL 1088-listed temporary lighting, choose one of those five. See UL 1088 explained.

Question 1: Do you want lamps in the box?

Lamps included: the SL10-100 and SL18-2 LED each come with ten 12W, 5000K LED lamps, so they go up straight from the box. The SL10-100 also includes ten snap-on cages. The SL18-2 INT has no bulbs at all: its ten LED heads are built into the string.

Bring your own lamps: the SL14-2, SL14-3 and SL12-3 ship without lamps, so crews can use the LED, CFL or incandescent lamps they already stock, up to 150W per lampholder. Lamp choice changes how many strings you can chain, so see our guide to LED vs. incandescent bulbs in a stringer.

Question 2: Do you need a grounded run?

A /3 cord carries a third conductor, the equipment ground, through the whole run. Some general contractors and job specs require grounded stringers, so check before ordering. The SL14-3 and SL12-3 are the grounded models. The rest are 2-wire.

Either way, temporary lighting on a construction site needs GFCI-protected power. See our guide to OSHA jobsite lighting requirements.

Question 3: How long are your runs?

Heavier cord carries more current and loses less voltage over distance. That matters most on long chains, where the first string carries the load of every string after it.

  • 18 AWG (SL18-2 LED, SL18-2 INT): light-duty LED runs. The SL18-2 LED is limited to 12W lamps.
  • 14 AWG (SL10-100, SL14-2, SL14-3): the usual choice for typical floors and corridors.
  • 12 AWG (SL12-3): long chains across big floors and heavy-duty sites.

Our guide to string light wire gauge explains the cord markings and voltage drop in detail.

Question 4: How many strings will you chain?

Every SL model has a plug on one end and a connector on the other, so runs chain end to end. The limit is the string’s rating, which covers every string connected to it. With 12W LED lamps, a string draws about 1 amp, so a 12A string leaves plenty of room. With 100W incandescent lamps, a single string draws more than 8 amps, so you can’t add a second.

The SL18-2 INT can link up to 4 strings. Past that, voltage drop dims the far end and the cord can overload, so start a new run from another outlet.

Quick picks

  • “I just need light, today”: SL10-100
  • “We have our own lamps”: SL14-2
  • “The GC requires grounded stringers”: SL14-3
  • “Long chains across a big floor”: SL12-3
  • “Concentrated light for a work area”: add a CM7-100 LED work light

Outfitting a whole site? Compare every model in the SL Series Temporary Stringers collection, or contact us with your floor size and run lengths for a quote.


Sources

Leave a Reply

Your email address will not be published. Required fields are marked *

RELATED

Posts